Divers are often confused between basic and advanced wreck diving certifications and why there is a need for two courses. This is a good question considering a wreck is a wreck and diving is diving. All wrecks present the same risks. The single biggest difference is the diver and what they want to do during their dive on the wreck.
Basic Wreck Diving
Basic wreck dives would consist of swimming around the outside of the wreck, with the occasional peek in the wheelhouse or cargo hold. That does not mean there is not a lot to learn, even though the plan is to stay on the outside, or that there is not a lot to see. For divers wishing to survey the wreck or watch the marine life it attracts, this is the perfect spot. The outside of a wreck is also where we get those dramatic photographs of the bow stabbing towards the surface, hoping to sail again. For the diver wishing to view a piece of history, diving on the wreck can show you what some will only read about or see in pictures. This type of wreck diving has been enjoyed by many and for some divers this is as close as they want to get to a wreck.
The equipment needed for a basic wreck dive is pretty much the same equipment used for any dive. There are some pieces of additional equipment that may come in handy: a large slate for drawing the wreck and noting depths and features, a small reel, and a lift bag or surface marker buoy (SMB) just in case you lose track of the anchor line or get blown off the wreck.
Advanced Wreck Diving
Advanced wreck diving is really an extension of basic wreck diving. Advanced wreck diving starts on the exterior with a survey that familiarizes the diver with how the wreck is oriented: on its keel, on its side, separated into halves or with a twist. No two wrecks are the same and all suffer different damages due to how they sunk, how long their journey was to the bottom or the severity of the storms that have battered them over the years. There are even vertical wrecks and wrecks clinging to the side of walls. Learning how to effectively survey the wreck is an extremely important part of any wreck course. This visual image, is the only thing the diver will have to rely on, since his compass will not work. Even wooden wrecks tend to have massive hunks of metal or boilers, which send the compass into a spin. But here is the point where advanced wreck diving waves goodbye to basic wreck diving; it is where we go beyond “the light zone.”
The light zone is where ambient light enters an overhead area and artificial light is required in order to see. Once a diver enters an area in a wreck where a light is required, the rules of wreck diving change. A diver in this area must have the knowledge and skills they need to go into and come out of a wreck should the worse possible scenario, a complete silt out, occur. In order to do this, divers must know how to use a reel for navigation and how to properly tie off lines so they will not get cut during the dive. But this is also where the fun starts for wreck divers craving to study the more intimate details of the wreck or seeking that hidden artifact that no one else has seen.
Many wreck divers don’t feel they know all there is to know about a wreck until they have explored every room, seen the engines that pushed this once mighty vessel through thousands of nautical miles. There are also those who want to see the artifacts, some still lying in place as if the ship had never sunk. To some, the best part of the wreck dive started before they even entered the water, it was the hours of researching and planning that lead up to the dive. But before a wreck diver can see these sights they need to undergo serious dive training and have an experienced TDI Wreck Instructor explain the safety protocols. Remember that worst case scenario of silting out? For divers who spend their time on the outside of a wreck, this silt would only come from the fin thrust as it hits the bottom or deck of the boat. For divers entering the wreck, this silt comes from above and is called percolation silt, cased by the exhaled bubbles as they dislodge rust, insulation or other debris trapped on the ceiling.
Another big area of difference between basic and advanced wreck diving is the equipment needed. Advanced wreck divers should carry at a minimum two lights a primary and a back-up, two cutting devices, two reels, two lift bags and a redundant air supply. While this may sound like a lot of equipment, a TDI Advanced Wreck Instructor can teach divers where to stow this equipment and still keep very streamlined in the water.
Wrecks have a mysterious calling to many people. Wrecks that occurred due to war or sank because of a violent storm draw divers in, some say this is because it closes that chapter in our lives. Others would go there because they read about it in history books and they wanted to see it firsthand. Whatever the reason, or if you are going to view the wreck from the outside or inside, it is always best to take the course from an instructor who has been there and done it. Sometimes the best lesson learned from a course is not what is in the book or the skills you had to perform, it is merely what you learned by diving with and watching how an experienced instructor handled himself underwater.
Every wreck has a story, even the ones that were sunk intentionally. So do yourself a favor…find out what that story is! Safe diving!
Thanks :::: SDI TDI ERDI
Kathy Dowsett
www.kirkscubagear.com
Showing posts with label scuba equipment. Show all posts
Showing posts with label scuba equipment. Show all posts
Sunday, August 26, 2012
Wednesday, June 30, 2010
How Deep Can I Dive????
Image by Dude Crush via Flickr
How Deep Can I Go With Standard Scuba Equipment?
Firstly, a little disclaimer: Just because you can go a certain depth does certainly not mean it is safe, especially if you do not have the appropriate training and experience for that depth.
With standard scuba equipment you have a maximum depth of approximately 60m (195ft). This is because, after this depth the pressure exerted on the oxygen in your air supply becomes toxic, going further or experiencing this toxicity for too long could prove fatal. At depths between 30-60m, while not dangerous in itself, is likely to bring on the onset of nitrogen narcosis which can have a severe impact on a diver's decision making, leading to stupid and sometimes dangerous actions.
As we mentioned, oxygen at higher partial pressures (1.44bar to be exact) become toxic. Aside from this, the diver must also be aware since their air is getting compressed, it will provide fewer "breaths" and will of course, run out a lot quicker than if he or she were diving at a shallower depth.
PADI recommend that the absolute maximum depth for a recreational diver is 40m (130ft), while BSAC recommend a maximum depth of 50m (165ft) with proper training.
Is Diving Deep Important?
The short answer to this is, no - diving deep is not important for the recreational diver most of the time. The shallower you are, the more bottom time you'll have and the less you'll have to worry about - a more pleasant experience for all.
Keep in mind the "mission" of your dive when you plan it. There's a lot of things to see at depths less than 40m (130ft). It maybe be necessary though, if a diver is specifically doing a recovery dive or viewing a wreck that they just didn't damn sink at a sensible depth to go deeper. In these cases it is important that you are well versed with your scuba gear, the effects of nitrogen narcosis and know you your limits in terms of experience and ability and of course, of your buddy too.
So How Deep Can You Go With Specialist Equipment?
There are specialised pieces of scuba diving equipment that make it possible to overcome deep diving problems such as nitrogen narcosis, oxygen toxicity and the tremendous pressure you can face at extreme depths.
It is possible to technical divers to go as deeper than 200m (700ft) with closed circuit rebreathers. As we discussed earlier, oxygen at high pressures becomes toxic, so these divers also use mixed gas, the usual mix is helium and oxygen, which eliminates the nitrogen narcosis problem, but does leave you sounding like tweety bird when you talk!
Commercial divers, can operate at these depths (200m/700ft+), for incredibly long periods of time. They will typically work 6-7 hours per day, but stay under the water for up to a month at a time! Rather than waste time decompressing, these guys essentially "live" in compression chambers while they're not diving. These compressors can be on a ship, or in some cases, sunken to be near the dive site.
Thanks to the Scuba Site for this article.
Kathy Dowsett
www.kirkscubagear.com
Related articles by Zemanta
- Recreational Scuba Diving and Scuba Diver Certification (scuba-diving.suite101.com)
- Nitrox (leavemehere.wordpress.com)
- Five Tips for Safe and Fun Recreational Scuba Diving Training (scuba-diving.suite101.com)
Subscribe to:
Posts (Atom)

